UCC28220DG4 Overview
This switching controller fits most application requirements since it is packaged in a SOIC package. 2 outputs can be generated with the dc motor controller. There is a switch at 1.1MHz that can be used with this controller. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 16 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 12V. There are only 16 pins on switching converter. DC regulator outputs 3.3V voltage according to the test statistics. voltage regulator dc to dcs with a 90 % duty cycle are designed to be reliable when powered on and powered off. Switching controllers operate at 2MHz frequencies. A temperature of -40°C or higher is recommended. A temperature of 105°C degrees Celsius is recommended. A total of 1 functions are present in the switch converters. It is planned to design voltage regulators switchings with 16 pins. A maximum frequency of 2MHz can be set by the controller. It is possible to set the input voltage to 48V for nominal working status. With 10mA input, it is ideal for switching controllers. In normal operation, it outputs 400mV. The supply voltage must be 12V. 6mA more than 6mA current should be supplied to the controller. As far as maximum supply voltage is concerned, switching voltage regulators is rated as 14.5V.
UCC28220DG4 Features
Switching Frequency: 1.1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 2MHz
UCC28220DG4 Applications
There are a lot of Texas Instruments
UCC28220DG4 DC to DC converter applications.
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
