UCC25702PW Overview

With a 14-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 8.8V~15V volts and has 8.8V~15V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. This switching controller can switch at 100kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Frequency Control, Sequencing, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 14 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 11V. A search for "UCC25702" will reveal other relevant dc to dc converter ics. 14 pins are present on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the input voltage of the dc dc voltage regulator be 9.6V. Statistically, the DC regulator outputs 400mV voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controller operates at 700kHz Hz. DC switching uses 750μA when it is dormant. A supply voltage of 11V is required. Current supplied to the controller should not exceed 20mA.

UCC25702PW Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz

UCC25702PW Applications

There are a lot of Texas Instruments UCC25702PW DC to DC converter applications.

• Experimental setup
• SMT equipment
• Imported equipment
• Adjustable voltage or current linear circuits
• Sink circuits
• Surface processing equipment
• Digital display device
• Thermal power
• Balance equipment
• Milling machines