8 Terminals 6.9V~12V 8-Pin UCC2813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver
SOT-23
UCC2813DTR-0G4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 4 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Number of Pins
8
Weight
72.603129mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Switching Regulator or Controllers
Technology
BICMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Supply Voltage
10V
Frequency
1MHz
Base Part Number
UCC2813
Function
Step-Up, Step-Up/Step-Down
Number of Outputs
1
Output Voltage
1V
Output Type
Transistor Driver
Input Voltage-Nom
10V
Analog IC - Other Type
SWITCHING CONTROLLER
Output Configuration
Positive
Output Current
200mA
Voltage - Supply (Vcc/Vdd)
6.9V~12V
Control Features
Frequency Control
Input Voltage (Min)
7.5V
Topology
Boost, Flyback, Forward Converter
Control Mode
CURRENT-MODE
Control Technique
PULSE WIDTH MODULATION
Rise Time
41ns
Supply Current-Max (Isup)
30mA
Synchronous Rectifier
No
Fall Time (Typ)
44 ns
Max Duty Cycle
100 %
Duty Cycle (Max)
99%
Switching Frequency
1MHz
Height
1.75mm
Length
4.9mm
Width
3.91mm
Thickness
1.58mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
2,500
$1.39783
$2.79566
UCC2813DTR-0G4 Product Details
UCC2813DTR-0G4 Overview
It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 6.9V~12V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~85°C TA. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 8. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. You can find other relevant dc to dc converter ics by searching "UCC2813". There are a total of 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 7.5V. DC regulator outputs 1V voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 1MHz Hz. The supply voltage must be 10V. You should not supply more current than 30mA to the controller. 1MHz is the frequency at which this controller performs well most of the time.
UCC2813DTR-0G4 Features
Transistor Driver Outputs Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 100 % Frequency: 1MHz Switching Frequency: 1MHz
UCC2813DTR-0G4 Applications
There are a lot of Texas Instruments UCC2813DTR-0G4 DC to DC converter applications.