UCC27200DDARG4 Overview

There is a package in the form of Tape and Reel.Configuration is supported by 2 drivers.The configuration starts with 8 terminations.In this case, Surface Mount indicates how the device is to be mounted.As a result, it is configured with 8 pins when it is designed.With a supply voltage of 12V, it is designed to operate.Mosfet driver utilizes the interface IC HALF BRIDGE BASED PERIPHERAL DRIVER.In the maximum case, the output current can be 3mA volts.There are several useful electronic components within its subcategory MOSFET Drivers.The board has a total of 8 component pins.140°C is the maximum operating temperature that can be tolerated.Temperatures below -40°C are allowable as a minimum.For higher stability, the supply current should be kept at 4mA.For operation, it requires a voltage of 17V.This device operates at 8V as the minimum supply voltage.As a result, it outputs a 3A current.Setting the operating supply voltage to 12V is recommended.The frequency of 1MHz can be adjusted in order to improve efficiency.

UCC27200DDARG4 Features

Embedded in the Tape and Reel package
2 drivers
8 pins

UCC27200DDARG4 Applications

There are a lot of Texas Instruments
UCC27200DDARG4 gate drivers applications.

• High-speed communications
• RGB applications
• Broadcast equipment
• Active filtering
• Head-up and Head mounted displays
• High current laser/LED systems
• LCD/LCoS/DLP portable and embedded pico projectors
• Multicolor LED/laser displays
• Smart Phones
• Portable Navigation Devices