UCC27322D Overview

There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is packaged in the way of Tube.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 4V~15V, it can demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.The allowable temperature range that this device can be operated in is -40°C~105°C TA.Non-Inverting is the input type used in this program.The configuration is based on 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number UCC27322.Mosfet driver is mounted using Surface Mount.There are 8 pins available in the device.A voltage of 14V is required for its operation.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 9A.Several electronic components are included in its subcategory of MOSFET Drivers.The board contains 8 pins for component connections.There are 1 outputs integrated for its basis.The output current supported by the device is 9A.Using 650mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 1mA in order to achieve greater stabilMosfet gate driversy.A voltage of 150mV is output by this device.The supply voltage is 1mA.

UCC27322D Features

Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW

UCC27322D Applications

There are a lot of Texas Instruments UCC27322D gate drivers applications.

• 3-Phase Motor Inverter Driver
• LCD/LCoS/DLP portable and embedded pico projectors
• Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
• Motor Drives
• Isolated Supplies for controller area network (CAN),
• Automotive Applications
• Isolated Gate Driver Supplies
• Refrigerator
• Power factor correction (PFC) circuits
• High frequency line drivers