UCC2803PWG4 Overview

In the TSSOP package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. It can switch at 1MHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. DC regulator outputs 4V voltage based on test statistics. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 1MHz is set for the switching controller. You should keep dc regulator at -40°C degrees or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. Designing voltage regulators switchings with 8 pins. Switching can take place at a maximum frequency of 1MHz. This is an ideal solution for switching controllers with 1A inputs. During normaloperations, it outputs a value of 1V. This voltage controller requires a supply voltage of 10V. It is important that the controller is supplied with 30mA more than 30mA volts of current. Voltage rating is 12V.

UCC2803PWG4 Features

Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC2803PWG4 Applications

There are a lot of Texas Instruments
UCC2803PWG4 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment