UCC28C41DRG4 Overview

In the SOIC package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape and Reel solid enclosure around the pmic. It can switch at 1MHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 1MHz is set for the switching controller. Hence, ALSO OPERATES IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. You should keep dc regulator at -40°C degrees or higher. There should be 105°C temperature above 105°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. Designing voltage regulators switchings with 8 pins. It is possible to set the input voltage as 18V for nominal working statuses. This is an ideal solution for switching controllers with 200mA inputs. During normaloperations, it outputs a value of 18V. Voltage rating is 18V.

UCC28C41DRG4 Features

Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE

UCC28C41DRG4 Applications

There are a lot of Texas Instruments
UCC28C41DRG4 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment