UCC2805D Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. With Transistor Driver dc switching's output (s), it is able to handle it. 3.6V~12V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 31kHz. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. Search for "UCC2805" to find other relevant dc to dc converter ics. 8 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. 4V should be the minimum input voltage for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 1V voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controllers operate at 1MHz frequencies. Switching controller is necessary to provide a voltage of 10V. A controller's current should not exceed 25mA. The nominal supply current for this the controllers dc is 500μA.

UCC2805D Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2805D Applications

There are a lot of Texas Instruments UCC2805D DC to DC converter applications.

• SMT equipment
• Pipe bending machines
• Product testing
• CNC system
• Television equipment
• Network technology
• Milling machines
• Scientific testing
• Current source circuits
• Smoke prevention equipment