UCC2805PW Overview

It comes in a 8-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3.6V~12V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. With this switching controller, you can switch at 31kHz. Surface Mount makes it suitable for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. Other relevant dc to dc converter ics can be found by searching "UCC2805". There are a total of 8 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4V. DC regulator outputs 1V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 1A. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controllers operate at 1MHz frequencies. The supply voltage must be 10V. A controller's current should not exceed 25mA. This the controllers dc has a nominal current supply of 500μA.

UCC2805PW Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2805PW Applications

There are a lot of Texas Instruments UCC2805PW DC to DC converter applications.

• Lathes
• Arc suppression circuits
• Surface processing equipment
• Injection molding machinery
• Various precision measuring instruments
• Electrical distribution systems
• Smoke prevention equipment
• Telecommunications equipment
• Surge protection circuits
• Smart grid