UCC2807N-1 Overview

With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 6.9V~13.5V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 202kHz. Through Hole makes it suitable for general dc dc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of 8 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 10V is input. UCC2807 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 7.5V. Statistically, DC regulator outputs 400mV volts. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 78 % during power-up and power-down. In most applications and prototypes, DC switcher's Through Hole makes it suitable. Switching controller operates at 1MHz Hz. This voltage controller requires a supply voltage of 10V.

UCC2807N-1 Features

Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 78 %
Frequency: 1MHz

UCC2807N-1 Applications

There are a lot of Texas Instruments UCC2807N-1 DC to DC converter applications.

• Surge protection circuits
• Digital precision reference circuits
• Bending machines
• Low output voltage switching power supply circuits
• Computer-related products
• Computer monitoring equipment of building
• Medical monitoring systems
• Electrical distribution systems
• Power supplies of electronic gadgets
• Plate bending machines