UCC2813D-0 Overview

It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 6.9V~12V. Qualified to work in an dc switcher with -40°C~85°C TA. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. 8 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 10V. UCC2813 can be searched for other relevant dc to dc converter ics. Pins number 8 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 7.5V. Based on the test statistics, DC regulator outputs voltage 1V. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controllers work at 1MHz Hz. To run the voltage regulator dc to dc safely and reliably, users should apply 10V to the voltage regulator dc to dc. A supply voltage of 10V is required. Current supplied to the controller should not exceed 30mA. It runs on a 500μA supply current. There is 500μA nominal current supply for this the controllers dc. When this switching controller is running at frequency 1MHz, it can perform well in most cases.

UCC2813D-0 Features

Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz

UCC2813D-0 Applications

There are a lot of Texas Instruments UCC2813D-0 DC to DC converter applications.

• Handheld GPS
• Terrestrial set-top boxes
• Photovoltaic power
• Hydraulic presses
• Correction machines
• Packaging
• Industrial robots
• Fire elevators
• Hydro power
• Linear guide