UCC2813D-5G4 Overview

It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. There is a Tube solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. 3.6V~12V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. A variety of 8 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 10V volts. Other relevant dc to dc converter ics can be found by searching "UCC2813". There are a total of 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the input voltage of the dc dc voltage regulator be 4V. DC regulator outputs 5V voltage based on test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controllers work at 1MHz Hz. Switching controller is necessary to supply a voltage of 10V. It is not recommended to supply more current to the controller than 30mA. 1MHz is the frequency at which this controller performs well most of the time.

UCC2813D-5G4 Features

Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz

UCC2813D-5G4 Applications

There are a lot of Texas Instruments UCC2813D-5G4 DC to DC converter applications.

• Sensitive electronic devices
• PSRR circuits
• Linear guide
• Experimental setup
• Computed tomography (CT)
• Product testing
• Power supplies of electronic gadgets
• Correction machines
• Solar power plants
• Fire elevators