UCC35705DGKTR Overview

It comes in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tape & Reel (TR) is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 8.2V~15V voltage are supplied and operated. A 0°C~70°C TA dc switcher is not a problem. The switching controller can be switched at 1MHz. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. A variety of 8 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 11V. Searching "UCC35705" will return other relevant dc to dc converter ics. 8 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 300mV voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 5mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 93 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers operate at 4MHz frequencies. For nominal working status, the input voltage can be set as 30V.

UCC35705DGKTR Features

Transistor Driver Outputs
Switching Frequency: 1MHz
Current Limit
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
Frequency: 4MHz

UCC35705DGKTR Applications

There are a lot of Texas Instruments UCC35705DGKTR DC to DC converter applications.

• Milling machines
• CMM
• Special machining machine tools
• Electrical power transmission
• Automatic testing equipment
• Various CNC machine tools
• Electric heating, lighting
• Hydraulic presses
• Smoke exhaust equipment
• Automatic plug-in machines