UCC3580D-1 Overview

Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 2 outputs. The pmic is packaged in Tube solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 8.5V~16V. Qualified to work in a 0°C~70°C TA dc switcher. This switching controller can switch at 400kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Enable, Ramp, Soft Start for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. 16 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "UCC3580". Switching converter has a total of 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. According to the test statistics, DC regulator outputs 400mV voltage. The dc dc regulator's usual output current is 100mA, which should be noted down when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 69 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe switching controller works at a frequency of 1MHz. The dc switching utilizes 2.5mA when it is in a dormant state. A supply voltage of 12V is required. Current supplied to the controller should not exceed 3.5mA.

UCC3580D-1 Features

Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz

UCC3580D-1 Applications

There are a lot of Texas Instruments
UCC3580D-1 DC to DC converter applications.

• CNC system
• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments