UCC3580DTR-1G4 Overview

In the SOIC package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. It can switch at 430kHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. There are 16 pins on switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 10V. The dc to dc regulator can only accept 14V input voltage. Voltage regulator dc to dc is designed to operate at 69 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 1MHz is set for the switching controller. You should keep dc regulator at 0°C degrees or higher. There should be 70°C temperature above 70°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. Designing voltage regulators switchings with 16 pins. Switching can take place at a maximum frequency of 1MHz. This is an ideal solution for switching controllers with 100mA inputs. During normaloperations, it outputs a value of 400mV. Voltage rating is 16V.

UCC3580DTR-1G4 Features

Switching Frequency: 430kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz

UCC3580DTR-1G4 Applications

There are a lot of Texas Instruments
UCC3580DTR-1G4 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment