UCC3580N-3 Overview

It comes in the 16-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. For outputs of 2, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 8.5V~16V are the dc control's supply voltage and operating voltage, respectively. A 0°C~70°C TA dc switcher is not a problem. With this switching controller, you can switch at 400kHz. The Through Hole allows it to be used for dc dc regulator in general. Enable, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 16 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. A search for "UCC3580" will reveal other relevant dc to dc converter ics. 16 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Statistically, DC regulator outputs 400mV volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 69 %. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 1MHz Hz.

UCC3580N-3 Features

Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz

UCC3580N-3 Applications

There are a lot of Texas Instruments UCC3580N-3 DC to DC converter applications.

• CMM
• Machining centers
• Injection molding machinery
• Surge protection circuits
• Gear/thread machining machines
• Industrial controllers
• Plate bending machines
• Window air conditioners
• Elevator lighting
• Automation technology