UCC38C44P Overview

With a 8-DIP (0.300, 7.62mm) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 9V~18V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where 0°C~70°C TJ is the 0°C~70°C TJrm. In this switching controller, the switch can be set to Up to 1MHz. dc dc regulator can be generalized using Through Hole. Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. Searching "UCC38C44" will return other relevant dc to dc converter ics. Switching converter has a total of 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 18V. You should note down the dc dc regulator's usual output current of 1A when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. DC switcher's Through Hole qualifies it for most applications and prototypes. Switching controller operates at 1MHz Hz. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN CURRENT MODE. It is suggested that users apply 15V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. 18V is the nominal working voltage. The supply current is 2.3mA. For this the controllers dc, the nominal current supply is 2.3mA.

UCC38C44P Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE

UCC38C44P Applications

There are a lot of Texas Instruments UCC38C44P DC to DC converter applications.

• Balance equipment
• Refrigerators of central air conditioners
• Television equipment
• Automatic testing equipment
• Die casting equipment
• Domestic water pumps
• Driver circuits
• Lathes
• Cutting machine tools
• Electrical distribution systems