UCC5618PWPG4 Overview

Termination with a 18 device, which matches the transmission line's characteristic impedance, is considered a 18 termination. Because of its low package cost, the 28-PowerTSSOP (0.173, 4.40mm Width) is widely used in the electronic industry. Tube's packaging is made of the same materials. Surface Mount is used for mounting it on a PCB. A maximum operating temperature of 0°C~70°C should not be exceeded. The material is SCSI-qualified for standard applications. You can find related parts by using Base Part Number UCC5618. There are a number of 28 pins included for specific applications. In terms of 18 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. For high efficiency, it is recommended that the supply voltage is maintained at 4.75V. On it there is a Surface Mount-mount. Communication devices such as computers use 28 pins, which are pronged contacts. Power Supplies are needed to operate 4.75V Power Supplies. Here is the resistance of this electrical device: 110Ohm (Ω). To fully perform its functions, 5.25V needs supply current.

UCC5618PWPG4 Features

18 terminations
Tube package
UCC5618 family
28 pin count
18 signal lines
28 pins
4.75V power supplies

UCC5618PWPG4 Applications

There are a lot of Texas Instruments
UCC5618PWPG4 Signal Terminators applications.

• Programmable logic controller
• Remote input module
• Data Networking
• PCI Cards
• Telecommunication Equipment
• Data Routers
• Data Switches
• Programmable logic controller and remote input modules
• High speed protected termination for digital input with serialized SPI output
• IEC61131-2 type 1, 2 and 3