TC7SB66CFU,LF Overview

In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. In total, there are 5 terminations. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. It has an internal resistance of 4Ohm. The functions of 5 pins can be found in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. 1.65V is the lowest voltage that should be fed to the electronic electronic part. A digital multiplexer may suffer damage if voltage is applied above 10μA. During operation, the multiplexer should not be exposed to a temperature above 85°C. The switch device is capable of conducting in a 1-bit mode.

TC7SB66CFU,LF Features

1-Bit

TC7SB66CFU,LF Applications

There are a lot of Toshiba
TC7SB66CFU,LF Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems