TC74VHC175FTEL Overview

The item is packaged in 16-TSSOP (0.173, 4.40mm Width)cases. The package Tape & Reel (TR)contains it. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 2V~5.5Vvolts. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. The FPGA belongs to the TC74VHC series. You should not exceed 115MHzin the output frequency of the device. A total of 1elements are present in it. A total of 16terminations have been recorded. Members of the 74VHC175family make up this object. The power supply voltage is 5V. This T flip flop has a capacitance of 4pF farads at the input. In terms of electronic devices, this device belongs to the AHC/VHCfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 16pins on it. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with 4bits. Vsup reaches 5.5V, the maximal supply voltage. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. In order to achieve its superior flexibility, 4 circuits are used. In order for the device to operate, it requires 2/5.5V power supplies. There is 4μA quiescent current consumption by it.

TC74VHC175FTEL Features

Tape & Reel (TR) package
TC74VHC series
16 pins
4 Bits
2/5.5V power supplies

TC74VHC175FTEL Applications

There are a lot of Toshiba Semiconductor and Storage TC74VHC175FTEL Flip Flops applications.

• Instrumentation
• Consumer
• Modulo – n – counter
• Control circuits
• Common Clocks
• Load Control
• Bus hold
• Set-reset capability
• Shift Registers
• Buffered Clock