TE0630-01I Overview

FPGA, USB Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of Spartan-6 LX-45 cores in it.It is default for the microcontroller to set the mode to -40°C~85°C.There is a flash size 8MB on the MCU electronics.In this case, the connector type is B2B.There are two versions of this microcontrollers in the TE0630 Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 128MB.In this MCU chip, the speed is set to 100MHz.An Intel Cypress EZ-USB FX2LP Core Processor is at the heart of this MCUs.

TE0630-01I Features

Core processor of Spartan-6 LX-45
Flash size of 8MB
Speed of 100MHz

TE0630-01I Applications

There are a lot of Trenz Electronic GmbH
TE0630-01I Microcontroller, Microprocessor, FPGA Modules applications.

• Industrial Control
• Process Control
• Process Monitoring
• Healthcare Monitoring
• Patient Monitoring
• IoT Secure Gateways
• Human Machine Interface
• Human Machine Control Panel
• Home and Building Automation
• Thermostat