TEMD1030 Overview

These photodiodes are packaged in the Tape & Reel (TR) to protect them from damage. The photodiodes are put into SMD/SMT packages for safety protection. The voltage for the photodiodes should not exceed 60V in reverse-bias mode on a continual basis. The photodiodes have 2 pins. The photodiodes could release 75mW heat within a circuit. The reverse anode voltage for the photodiodes should be 60V. In general, the maximum heat released by the photodiodes should be 75mW in a circuit. In the DC circuit, the photodiodes can work properly with the reverse voltage of 60V. The voltage needed to get current to flow across a photodiode should be 1.3V. Even in the absence of light input, a photodiode occurs 1nA current.

TEMD1030 Features

Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -40°C~85°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: Surface Mount
Spectral Range: 790nm ~ 1050nm
Viewing Angle: 30°
Responsivity @ nm: 0.55 A/W @ 950nm

TEMD1030 Applications

There are a lot of Vishay Semiconductor Opto Division
TEMD1030 Photodiodes applications.

• High speed photo detector
• Infrared remote control
• Infrared data transmission
• Photo interrupters
• Shaft encoders
• Electronic Equipment
• Industrial Automation
• Machine Controls
• Light Barriers
• Vision Controls