DG201BDQ-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NC switching circuit is used to build these analog multiplexers. Try searching with DG201 if you're looking for variants. There is 160Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 25V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 50μA current would be sufficient. The analogue multiplexer may be damaged if voltage is greater than 50μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. If you are using dual power supplies, you should attach at least 4.5V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. It is possible to operate 4 inputs.

DG201BDQ-T1-E3 Features

1 Channels
Switch Circuit: SPST - NC
50μA Supply Current

DG201BDQ-T1-E3 Applications

There are a lot of Vishay Siliconix
DG201BDQ-T1-E3 Analog Switches & Multiplexers ICs applications.

• Transmit
• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems