DG211BDJ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, 16 terminations have occurred. The electrical component body receives 16 pins. Based on SPST - NC switching circuits, these analog multiplexers work. There is 85Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 4.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 10μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. When using dual power supplies, you should attach at least 4.5V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. It is possible to operate 4 inputs. Drain to Source resistance for this electronic component is 85Ohm.

DG211BDJ Features

Switch Circuit: SPST - NC
Drain-to-Source resistance: 85Ohm

DG211BDJ Applications

There are a lot of Vishay Siliconix DG211BDJ Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Battery Powered Instruments
• Audio signal routing
• Cable Modem
• E1 Multiplexer
• Signal routing between systems
• New designs requiring multiplexer functions
• Digital cross connects (DSX-1)
• Sample-and-hold systems
• Private Branch Exchange (PBX)