DG2307DL-T1-E3 Overview

Shipping overseas is convenient due to the electrical component's packing in 6-TSSOP, SC-88, SOT-363. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. In total, 6 terminations have occurred. The electronic part provides high-quality output because it has 2 channels. With a 3V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 6 series. The analog switch ics are built using SPDT switching circuits. Using the DG2307 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 20Ohm. For details about the functions of 6 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. 2V should be the lowest voltage fed to the electronic component. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The electrical component supports 1 inputs. Multiplexer ics with 2 outputs are available.

DG2307DL-T1-E3 Features

2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz

DG2307DL-T1-E3 Applications

There are a lot of Vishay Siliconix DG2307DL-T1-E3 Analog Switches & Multiplexers ICs applications.

• Central office
• Switching Systems
• Public switching systems
• ATM
• PBXs
• Cell phones
• Data switching
• Audio/video switches
• Avionics test equipment
• Video signal routing