DG2511DN-T1-E4 Overview

This electronic part is conveniently packaged in 6-UFDFN, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. The operating temperature is extended to around -40°C~85°C TA. In total, there are 6 terminations. A 1 channel electronic part produces high-quality output. A 3V voltage supply should turn on and run the electronic component. A total of 6 pins are injected into the electrical part body. These analog multiplexers are built based on SPDT switching circuits. Use DG251* to search for variants of the digital switches. An switch multiplexer with 1.3Ohm internal resistance has a value of 1.3Ohm. The functions of 6 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. 1.8V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10nA. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. The electrical component supports 1 inputs. The analog switch ics includes 2 outputs.

DG2511DN-T1-E4 Features

1 Channels
Switch Circuit: SPDT
10nA Supply Current

DG2511DN-T1-E4 Applications

There are a lot of Vishay Siliconix DG2511DN-T1-E4 Analog Switches & Multiplexers ICs applications.

• E1 Network Equipment
• ISDN NT1/TA
• Battery Powered Instruments
• Medical Instrumentation
• Avionics
• DSUs
• Transmit
• Fiber to the Home
• MP3 players
• Communication systems