DG2716DL-T1-E3 Overview

As the electronic part is packed in 5-TSSOP, SC-70-5, SOT-353, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operation at a temperature around -40°C~85°C TA. There are 5 terminations totally. The electronic part provides high-quality output because it has 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. As part of the design of the 5 series, this electronic part has been incorporated into the system. Multiplexers built on a SPST - NC switching circuit are built. If you are looking for variants of the digital switch, trying search with DG2716. The internal resistance of this digital multiplexer is 600mOhm. You can find the functions of the 5 pins in the datasheets. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 3.6V. Digital switch that provides Single power at a cost-effective price. There should be 1.5V voltage fed to the electrical part below 1.5V. The analogue multiplexer could operate on 10nA current. A voltage of 1.5V~3.6V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 1μA. There are 1 inputs to be operated.

DG2716DL-T1-E3 Features

1 Channels
Switch Circuit: SPST - NC
10nA Supply Current

DG2716DL-T1-E3 Applications

There are a lot of Vishay Siliconix DG2716DL-T1-E3 Analog Switches & Multiplexers ICs applications.

• Multiplexers
• HDTV
• Audio and video routing
• Microprocessor controlled systems
• Channel Banks
• E1 Network Equipment
• Video switching
• PBXs
• Mechanical reed relay replacement
• Audio and video switching