110ns, 70ns (Typ) DPST - NO 50Ohm Analog Switches BREAK-BEFORE-MAKE DG306 14 Pins 5nA 15V 14-DIP (0.300, 7.62mm)
SOT-23
DG306BDJ-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
8 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
14-DIP (0.300, 7.62mm)
Number of Pins
14
Weight
1.620005g
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2008
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
Resistance
50Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
470mW
Technology
CMOS
Number of Functions
2
Supply Voltage
15V
Base Part Number
DG306
Output
SEPARATE OUTPUT
Pin Count
14
Operating Supply Voltage
15V
Number of Channels
1
Number of Circuits
2
Max Supply Voltage
36V
Min Supply Voltage
13V
Operating Supply Current
1nA
Max Supply Current
100μA
Throw Configuration
DPST
Turn On Delay Time
110 ns
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
70 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
50Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
62 dB
Current - Leakage (IS(off)) (Max)
5nA
Channel Capacitance (CS(off), CD(off))
14pF 14pF
Switch Circuit
DPST - NO
Switch Time (Ton, Toff) (Max)
110ns, 70ns (Typ)
Charge Injection
30pC
Crosstalk
-74dB @ 500kHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Voltage - Supply, Dual (V±)
±15V
Height
3.81mm
Length
19.3mm
Width
7.11mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
DG306BDJ-E3 Product Details
DG306BDJ-E3 Overview
Packed in 14-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. The operating temperature is extended to around -40°C~85°C TA. In total, 14 terminations have occurred. A 1 channel electronic part produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. The electronic part body is injected with 14 pins. The analog switch ics are built using DPST - NO switching circuits. The circuits in this analogue multiplexer number 2. Try searching with DG306 if you're looking for variants. It has an internal resistance of 50Ohm. To find out what the 14 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 13V should be applied to the electronic component. For this digital switch to work, 1nA current would suffice. A voltage higher than 100μA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. You should attach at least 7V voltage if you are using dual power supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. 15V operating voltages can be used with this electrical part.
DG306BDJ-E3 Features
1 Channels Switch Circuit: DPST - NO 1nA Supply Current
DG306BDJ-E3 Applications
There are a lot of Vishay Siliconix DG306BDJ-E3 Analog Switches & Multiplexers ICs applications.