200ns, 150ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
DG308BDY-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Weight
665.986997mg
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2009
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
85Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
640mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
DG308
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
22V
Power Supplies
+-15/12V
Number of Channels
1
Max Supply Voltage
44V
Min Supply Voltage
4V
Operating Supply Current
1μA
Power Dissipation
640mW
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
200 ns
Number of Inputs
4
Voltage - Supply, Single/Dual (±)
4V~44V ±4V~22V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
150 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
85Ohm
Min Dual Supply Voltage
4V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
90 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
5pF 5pF
On-state Resistance Match-Nom
2Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
200ns, 150ns
Charge Injection
1pC
Channel-to-Channel Matching (ΔRon)
1.7 Ω
Crosstalk
-95dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Drain to Source Resistance
85Ohm
Normal Position
NO
Height
1.55mm
Length
10mm
Width
4mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$2.940121
$2.940121
10
$2.773699
$27.73699
100
$2.616696
$261.6696
500
$2.468582
$1234.291
1000
$2.328851
$2328.851
DG308BDY-E3 Product Details
DG308BDY-E3 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. In total, there are 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 16 pins are injected into the electrical part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Search with DG308 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 85Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 44V. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 4V. The switch device would be able to operate with 1μA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIn the case of dual power supplies, you should connect at least 4V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages range from 22V. The electrical component supports 4 inputs. There is 85Ohm Drain to Source resistance on this electronic part.
DG308BDY-E3 Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current Drain-to-Source resistance: 85Ohm
DG308BDY-E3 Applications
There are a lot of Vishay Siliconix DG308BDY-E3 Analog Switches & Multiplexers ICs applications.