The electronic part can be shipped overseas conveniently because it is packaged in 20-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. There are 20 terminations totally. This electronic part offers high-quality output due to its 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. A total of 20 pins are injected into the body of the electronic part. A SPDT switching circuit is used to build these analog multiplexers. A 1 circuit is present in this switch device. Try searching with DG333 to find analog multiplexer variants. A 75Ohm internal resistance characterizes this multiplexer. Datasheets for 20 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 40V. The digital multiplexer has a low cost Dual, Single supply. 5V should be the lowest voltage fed to the electronic component. An operating current of 200μA would be sufficient for this switch device. A voltage higher than 1μA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 22V. A dual power supply should have at least 4V voltage attached. 8 outputs are included in the analogue multiplexer.
DG333ALDW-E3 Features
4 Channels Switch Circuit: SPDT 200μA Supply Current
DG333ALDW-E3 Applications
There are a lot of Vishay Siliconix DG333ALDW-E3 Analog Switches & Multiplexers ICs applications.