150ns, 100ns SPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG401 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)
SOT-23
DG401BDJ-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
10 Weeks
Mount
Through Hole
Mounting Type
Through Hole
Package / Case
16-DIP (0.300, 7.62mm)
Number of Pins
16
Weight
1.627801g
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2013
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
55Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
450mW
Technology
CMOS
Number of Functions
2
Supply Voltage
15V
Base Part Number
DG401
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
15V
Number of Channels
1
Max Supply Voltage
36V
Min Supply Voltage
13V
Operating Supply Current
1mA
Power Dissipation
450mW
Max Supply Current
500μA
Throw Configuration
SPST
Turn On Delay Time
150 ns
Number of Inputs
2
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
100 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
45Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
72 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
12pF 12pF
On-state Resistance Match-Nom
3Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
150ns, 100ns
Charge Injection
60pC
Crosstalk
-94.8dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Voltage - Supply, Dual (V±)
±15V
Height
3.81mm
Length
21.33mm
Width
7.11mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
500
$1.75960
$879.8
DG401BDJ-E3 Product Details
DG401BDJ-E3 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. It is mounted in the position Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Use DG401 to search for variants of the digital switches. An switch multiplexer with 55Ohm internal resistance has a value of 55Ohm. The functions of 16 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Dual, Single supply type digital switch with a low cost. It is recommended to use 13V as the lowest voltage for the electrical part. 1mA current would be enough for this multiplexer to operate. If put voltage greater than 500μA on the device, damage may be caused to the analogue multiplexer. There is no problem with using dual supply voltage, but it should not exceed 22V. If you are using a dual power supply, you should attach at least 7V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. It can operate from 15V operating voltages. In order to operate the 2 inputs, there are several steps to follow.
DG401BDJ-E3 Features
1 Channels Switch Circuit: SPST - NO 1mA Supply Current
DG401BDJ-E3 Applications
There are a lot of Vishay Siliconix DG401BDJ-E3 Analog Switches & Multiplexers ICs applications.