DG406DN-T1-E3 Overview

As the electronic part is packed in 28-LCC (J-Lead), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 16:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 28. The electronic part provides high-quality output because it has 16 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 28 pins. There are 1 circuits in this switch device. Try searching with DG406 to find analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. Datasheets for 28 pin functions are available upon request. Multiplexers should not be powered above 44V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 7.5V. An operating current of 30μA would be sufficient for this switch device. When the digital multiplexer is charged above 500μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 20V. It is recommended that you attach at least 5V to your dual power supply. 15V operating voltages can be used with this electrical part.

DG406DN-T1-E3 Features

16 Channels
30μA Supply Current

DG406DN-T1-E3 Applications

There are a lot of Vishay Siliconix
DG406DN-T1-E3 Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement