DG408DJ-E3 Overview

Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, this analog switch is mounted. 8:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 8 channels. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. A 1 circuit is present in this switch device. Try searching for DG408 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 40Ohm. Datasheets for functions of 16 pins are available. In normalcircumstances, users should not exceed 44V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 13V. This digital switch can be operated with a current of 1μA. The analogue multiplexer may be damaged if voltage is greater than 500μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. It is recommended that you attach at least 5V to your dual power supply. Operating voltages of 36V are compatible with the electrical part. This electronic component presents a Drain to Source resistance of 100Ohm.

DG408DJ-E3 Features

8 Channels
1μA Supply Current
Drain-to-Source resistance: 100Ohm

DG408DJ-E3 Applications

There are a lot of Vishay Siliconix DG408DJ-E3 Analog Switches & Multiplexers ICs applications.

• Cable PC
• Video signal routing
• Digital cross connects (DSX-1)
• Fiber to the Home
• Wireless Local Loop
• Cable Modem
• DSLAMs
• E1 Network Equipment
• Industrial and process control systems
• Audio and video routing