DG409LDY-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 16. A 4 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this multiplexer. Try searching with DG409 to find analog multiplexer variants. There is 17Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. There should be 2.7V voltage fed to the electrical part below 2.7V. This digital switch can be operated with a current of 700μA. A voltage higher than 500μA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. The voltage should be at least 3V if you are using dual power supplies. There are 8 inputs to be operated. This electronic part has additional features, such as: VIDEO APPLICATION. There is 40Ohm Drain to Source resistance on this electronic part.

DG409LDY-E3 Features

4 Channels
Switch Circuit: SP4T
700μA Supply Current
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 40Ohm

DG409LDY-E3 Applications

There are a lot of Vishay Siliconix DG409LDY-E3 Analog Switches & Multiplexers ICs applications.

• Multiplexers
• E1 Multiplexer
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Audio and video routing
• Automotive applications
• Remote wireless modules
• Battery-powered systems
• Public switching systems
• SONET
• Isolation