Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG412HSDY-T1

DG412HSDY-T1

DG412HSDY-T1

Vishay Siliconix

105ns, 80ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

SOT-23

DG412HSDY-T1 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 547.485991mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2013
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 35Ohm
Terminal Finish TIN LEAD
Subcategory Multiplexer or Switches
Max Power Dissipation 600mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Output SEPARATE OUTPUT
Pin Count 16
Number of Channels 1
Max Supply Voltage 44V
Min Supply Voltage 13V
Power Dissipation 600mW
Max Supply Current 1μA
Turn On Delay Time 105 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 12V ±5V~20V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 105 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 35Ohm
Min Dual Supply Voltage 7V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 91 dB
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 12pF 12pF
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 105ns, 80ns
Charge Injection 22pC
Crosstalk -88dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-off Time-Max 90ns
Normal Position NO
Height 1.55mm
Length 10mm
Width 4mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
DG412HSDY-T1 Product Details

DG412HSDY-T1 Overview


Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on SPST - NO switching circuits. A 35Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 44V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 13V is the lowest voltage the electrical component should receive. Put voltage above 1μA on the multiplexer to cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. For dual power supplies, a voltage of at least 7V should be attached. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating the 4 inputs requires 4 inputs.

DG412HSDY-T1 Features


1 Channels
Switch Circuit: SPST - NO

DG412HSDY-T1 Applications


There are a lot of Vishay Siliconix DG412HSDY-T1 Analog Switches & Multiplexers ICs applications.

  • Optical Applications
  • High-Voltage
  • Fiber to the Home
  • Data Acquisition Systems
  • RGB switches
  • DVD-R
  • Cable Modem
  • PDAs
  • Automatic test equipment
  • Relay replacements

Related Part Number

MAX4760EBX+T
MAX4748ETE+T
FSAL200MTC
FSAL200MTC
$0 $/piece
CD74HC4016PWRE4
ADG708CRU
CD4097BNSR
CD4097BNSR
$0 $/piece
MC74HCT4852ADTG
MAX352ESE+T
MAX352ESE+T
$0 $/piece

Get Subscriber

Enter Your Email Address, Get the Latest News