105ns, 80ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE DG412 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
DG412HSDY-T1-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Weight
547.485991mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2016
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
80Ohm
Terminal Finish
MATTE TIN
Subcategory
Multiplexer or Switches
Max Power Dissipation
600mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Reach Compliance Code
unknown
[email protected] Reflow Temperature-Max (s)
40
Base Part Number
DG412
Output
SEPARATE OUTPUT
Pin Count
16
Qualification Status
Not Qualified
Number of Channels
1
Max Supply Voltage
44V
Min Supply Voltage
13V
Operating Supply Current
1μA
Power Dissipation
600mW
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
105 ns
Number of Inputs
4
Voltage - Supply, Single/Dual (±)
12V ±5V~20V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
105 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
35Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
91 dB
Current - Leakage (IS(off)) (Max)
250pA
Channel Capacitance (CS(off), CD(off))
12pF 12pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
105ns, 80ns
Charge Injection
22pC
Crosstalk
-88dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-off Time-Max
90ns
Normal Position
NO
Height
1.55mm
Length
10mm
Width
4mm
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
2,500
$1.79550
$3.591
DG412HSDY-T1-E3 Product Details
DG412HSDY-T1-E3 Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. A SPST - NO switching circuit is used for these analog switches. Try searching for DG412 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 80Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 44V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 13V. This multiplexer would work with 1μA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. A dual power supply should have at least 7V voltage attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. It is possible to operate 4 inputs.
DG412HSDY-T1-E3 Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current
DG412HSDY-T1-E3 Applications
There are a lot of Vishay Siliconix DG412HSDY-T1-E3 Analog Switches & Multiplexers ICs applications.
Power routing
Microprocessor controlled systems
SONET
Voice over IP/DSL – Integrated Access Devices, Smart