DG417LAK Overview

Shipping overseas is convenient due to the electrical component's packing in 8-CDIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Around -55°C~125°C TA is the extended operating temperature. A total of 8 terminations have been recorded. A 1 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 8 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. This digital multiplexer has 20Ohm internal resistance. For details about the functions of 8 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. 2.7V is the lowest voltage that should be fed to the electronic electronic part. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. The voltage should be at least 3V if you are using dual power supplies. There are 1 inputs to be operated.

DG417LAK Features

1 Channels
Switch Circuit: SPST - NC

DG417LAK Applications

There are a lot of Vishay Siliconix DG417LAK Analog Switches & Multiplexers ICs applications.

• ATM
• SDH/SONET multiplexers
• PBX interfaces
• Video switching
• Battery-powered systems
• High-Voltage
• T1/E1 Terminals
• Channel Banks
• DVD-R
• Medical Instrumentation