DG417LDQ-T1-E3 Overview

As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 8 pins. Circuits based on SPST - NC switching are used to construct these analog switch ics. Try searching with DG417 to find analog multiplexer variants. An switch multiplexer with 20Ohm internal resistance has a value of 20Ohm. Datasheets for 8 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.7V. An operating current of 1μA would be sufficient for this switch device. When the digital multiplexer is charged above 1μA, damage can occur. Despite this switch device's dual supply capability, its voltage should not exceed 6V. It is recommended that you attach at least 3V to your dual power supply. Operating the 1 inputs requires 1 inputs. Don't forget the additional features of this electronic part, such as: VIDEO APPLICATION.

DG417LDQ-T1-E3 Features

1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
Additional Features: VIDEO APPLICATION

DG417LDQ-T1-E3 Applications

There are a lot of Vishay Siliconix
DG417LDQ-T1-E3 Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement