DG419BDY-T1-E3 Overview

This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 8. A electrical component with 1 channels is capable of high-quality output. A 15V voltage supply should turn on and run the electronic component. This electronic part can be found in the 8 series. On the other hand, analog switches can be constructed using SPDT switching circuits. The circuits in this analogue multiplexer number 1. Try searching for DG419 variants of the analog switch ic. An switch multiplexer with 35Ohm internal resistance has a value of 35Ohm. Datasheets for functions of 8 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 36V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 13V. An operating current of 1μA would be sufficient for this switch device. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. It is recommended that you attach at least 7V to your dual power supply. The electrical part can be operated at 20V voltage levels. The 2 inputs need to be operated in order to work.

DG419BDY-T1-E3 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current

DG419BDY-T1-E3 Applications

There are a lot of Vishay Siliconix DG419BDY-T1-E3 Analog Switches & Multiplexers ICs applications.

• E1 Network Equipment
• Automatic test equipment
• SONET/SDH ADM
• Cross Connects
• Medical Instrumentation
• HDTV
• MP3 players
• Avionics
• Video switching
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads