43ns, 31ns SPDT 20Ohm Analog Switches BREAK-BEFORE-MAKE DG419 8 Pins 1nA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
SOT-23
DG419LDQ-T1-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins
8
Weight
139.989945mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2014
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Resistance
20Ohm
Terminal Finish
Matte Tin (Sn)
Additional Feature
VIDEO APPLICATION
Subcategory
Multiplexer or Switches
Max Power Dissipation
320mW
Technology
BICMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.65mm
[email protected] Reflow Temperature-Max (s)
40
Base Part Number
DG419
Pin Count
8
Number of Outputs
2
Number of Channels
1
Voltage
5V
Max Supply Voltage
12V
Min Supply Voltage
2.7V
Operating Supply Current
1μA
Nominal Supply Current
20nA
Power Dissipation
320mW
Max Supply Current
1μA
Turn On Delay Time
41 ns
Number of Inputs
1
Voltage - Supply, Single/Dual (±)
2.7V~12V ±3V~6V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-5V
Turn-Off Delay Time
32 ns
Max Dual Supply Voltage
6V
On-State Resistance (Max)
20Ohm
Min Dual Supply Voltage
3V
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
71 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
5pF
Switch Circuit
SPDT
Switch Time (Ton, Toff) (Max)
43ns, 31ns
Charge Injection
1pC
Crosstalk
-71dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
44ns
Switch-off Time-Max
33ns
Drain to Source Resistance
35Ohm
Height
850μm
Length
3mm
Width
3mm
Radiation Hardening
No
REACH SVHC
Unknown
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
DG419LDQ-T1-E3 Product Details
DG419LDQ-T1-E3 Overview
The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 8 pins are injected into the body of the electronic part. A SPDT switching circuit is used for these analog switches. Look for analog switch ic variants by searching with DG419. As far as internal resistance is concerned, it has 20Ohm. For details about the functions of 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. A cost-effective Dual, Single supply type analogue multiplexer. 2.7V should be the lowest voltage fed to the electronic component. 1μA current would be enough for this multiplexer to operate. The analogue multiplexer may be damaged if voltage is greater than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. A dual power supply should have at least 3V voltage attached. The electrical component supports 1 inputs. Check out the electrical component's additional features, such as the following: VIDEO APPLICATION. Drain to Source resistance is 35Ohm. Multiplexer ics with 2 outputs are available.
DG419LDQ-T1-E3 Features
1 Channels Switch Circuit: SPDT 1μA Supply Current Additional Features: VIDEO APPLICATION Drain-to-Source resistance: 35Ohm
DG419LDQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG419LDQ-T1-E3 Analog Switches & Multiplexers ICs applications.