Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG441LDY-E3

DG441LDY-E3

DG441LDY-E3

Vishay Siliconix

60ns, 35ns SPST - NC 30Ohm Analog Switches BREAK-BEFORE-MAKE DG441 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)

SOT-23

DG441LDY-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 665.986997mg
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 33Ohm
Terminal Finish Matte Tin (Sn)
Additional Feature ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 650mW
Technology BICMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
[email protected] Reflow Temperature-Max (s) 40
Base Part Number DG441
Output SEPARATE OUTPUT
Pin Count 16
Number of Channels 1
Max Supply Voltage 12V
Min Supply Voltage 2.7V
Operating Supply Current 10μA
Power Dissipation 650mW
Max Supply Current 1μA
Throw Configuration SPST
Turn On Delay Time 60 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 2.7V~12V ±3V~6V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 35 ns
Max Dual Supply Voltage 6V
-3db Bandwidth 280MHz
On-State Resistance (Max) 30Ohm
Min Dual Supply Voltage 3V
Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 5pF 6pF
On-state Resistance Match-Nom 0.1Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 60ns, 35ns
Charge Injection 5pC
Channel-to-Channel Matching (ΔRon) 100m Ω
Crosstalk -95dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 17Ohm
Normal Position NC
Height 1.55mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
DG441LDY-E3 Product Details

DG441LDY-E3 Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. Into the electrical component body are injected 16 pins. Unlike digital switches, these are based on SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with DG441. It has an internal resistance of 33Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 12V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. 2.7V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 10μA. Putting voltage greater than 1μA on the multiplexer may cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. When using dual power supplies, you should attach at least 3V. There are SEPARATE OUTPUT outputs on this analog switch ic. A 4 input needs to be operated. There is also ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY to look out for in this electronic part. Drain to Source resistance is 17Ohm.

DG441LDY-E3 Features


1 Channels
Switch Circuit: SPST - NC
10μA Supply Current
-3db Bandwidth: 280MHz
Additional Features: ALSO OPERATES WITH 2.7V TO 12V SINGLE SUPPLY
Drain-to-Source resistance: 17Ohm

DG441LDY-E3 Applications


There are a lot of Vishay Siliconix DG441LDY-E3 Analog Switches & Multiplexers ICs applications.

  • Fiber In The Loop (FITL)
  • Communication systems
  • Data switching
  • High reliability control systems
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Precision data acquisition
  • Cable Modem
  • Video switching
  • ATM
  • Data Acquisition Systems

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News