DG442BDJ-E3 Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. Mounted in Through Hole is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. In total, 16 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. Unlike digital switches, these are based on SPST - NO switching circuits. A 4 circuit is present in this switch device. Use DG442 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 90Ohm. To find out what the 16 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 25V voltage to the switch device. An effective Dual, Single supply digital multiplexer. 13V is the lowest voltage the electrical component should receive. 5μA current would be enough for this multiplexer to operate. Putting voltage greater than 1μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 22V. It is recommended that you attach at least 7V to your dual power supply. There are SEPARATE OUTPUT outputs on this analog switch ic.

DG442BDJ-E3 Features

1 Channels
Switch Circuit: SPST - NO
5μA Supply Current

DG442BDJ-E3 Applications

There are a lot of Vishay Siliconix DG442BDJ-E3 Analog Switches & Multiplexers ICs applications.

• Microwave transmission systems
• Power routing
• SONET
• Avionics test equipment
• Cross Connects
• Medical Instrumentation
• Routers
• RGB switches
• MP3 players
• DSUs