300ns, 200ns SPST - NO 80Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)
SOT-23
DG445BDJ Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Through Hole
Package / Case
16-DIP (0.300, 7.62mm)
Surface Mount
NO
Number of Pins
16
Operating Temperature
-40°C~85°C TA
Packaging
Tube
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
80Ohm
Subcategory
Multiplexer or Switches
Max Power Dissipation
470mW
Technology
CMOS
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
4
Supply Voltage
15V
Reach Compliance Code
unknown
Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED
Output
SEPARATE OUTPUT
Pin Count
16
Qualification Status
Not Qualified
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
36V
Min Supply Voltage
13V
Max Supply Current
1μA
Turn On Delay Time
300 ns
Voltage - Supply, Single/Dual (±)
12V ±15V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
200 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
80Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
90 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
5pF 5pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
300ns, 200ns
Charge Injection
1pC
Crosstalk
-95dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Height Seated (Max)
5.08mm
Length
20.13mm
Width
7.62mm
RoHS Status
Non-RoHS Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$6.444081
$6.444081
10
$6.079322
$60.79322
100
$5.735210
$573.521
500
$5.410575
$2705.2875
1000
$5.104316
$5104.316
DG445BDJ Product Details
DG445BDJ Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Through Hole. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. This electronic part can be found in the 16 series. Multiplexers built on a SPST - NO switching circuit are built. Circuits number 4 make up this analogue multiplexer. In this multiplexer, the internal resistance is 80Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. The digital multiplexer has a low cost Dual, Single supply. 13V is the lowest voltage that should be fed to the electronic electronic part. Put voltage above 1μA on the multiplexer to cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. For dual power supplies, a voltage of at least 7V should be attached. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
DG445BDJ Features
1 Channels Switch Circuit: SPST - NO
DG445BDJ Applications
There are a lot of Vishay Siliconix DG445BDJ Analog Switches & Multiplexers ICs applications.