DG442BDN-T1-E4 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-VQFN Exposed Pad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 16 terminations totally. This electronic part offers high-quality output due to its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with DG442. There is 90Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 25V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 13V. The analogue multiplexer could operate on 5μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIf you are using a dual power supply, you should attach at least 7V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Among the inputs that can be operated are the 4 inputs.

DG442BDN-T1-E4 Features

1 Channels
Switch Circuit: SPST - NO
5μA Supply Current

DG442BDN-T1-E4 Applications

There are a lot of Vishay Siliconix DG442BDN-T1-E4 Analog Switches & Multiplexers ICs applications.

• Wireless Local Loop
• Microprocessor Controlled Analog Systems
• Mechanical reed relay replacement
• Microprocessor controlled systems
• Residential Gateways, Home Gateway/Router
• Power routing
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• High-Voltage
• PDAs
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads