300ns, 200ns SPST - NO 80Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG445 16 Pins 500pA 15V 16-VQFN Exposed Pad
SOT-23
DG445BDN-T1-E4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
12 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-VQFN Exposed Pad
Number of Pins
16
Weight
57.09594mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2016
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
160Ohm
Terminal Finish
PALLADIUM GOLD OVER NICKEL
Subcategory
Multiplexer or Switches
Max Power Dissipation
850mW
Technology
CMOS
Terminal Position
QUAD
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
0.65mm
Reach Compliance Code
unknown
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
DG445
Output
SEPARATE OUTPUT
Pin Count
16
Qualification Status
Not Qualified
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
36V
Min Supply Voltage
13V
Operating Supply Current
5μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
300 ns
Voltage - Supply, Single/Dual (±)
12V ±15V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
200 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
80Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
90 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
5pF 5pF
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
300ns, 200ns
Charge Injection
1pC
Crosstalk
-95dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Height
950μm
Length
4mm
Width
4mm
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
2,500
$1.66250
$3.325
DG445BDN-T1-E4 Product Details
DG445BDN-T1-E4 Overview
Presented in 16-VQFN Exposed Pad, this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. The electronic part delivers high-quality output through its 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. There is an electrical component included in the 16 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Circuits number 4 make up this analogue multiplexer. Try searching with DG445 to find analog multiplexer variants. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. Datasheets for functions of 16 pins are available. This switch device is a typical Multiplexer or Switches. A voltage higher than 36V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Dual, Single supply type. 13V should be the lowest voltage fed to the electronic component. This multiplexer would work with 5μA current. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 22V. When using dual power supplies, you should attach at least 7V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.
DG445BDN-T1-E4 Features
1 Channels Switch Circuit: SPST - NO 5μA Supply Current
DG445BDN-T1-E4 Applications
There are a lot of Vishay Siliconix DG445BDN-T1-E4 Analog Switches & Multiplexers ICs applications.
New designs requiring multiplexer functions
Channelized and Unchannelized DS3 applications
Voice over IP/DSL – Integrated Access Devices, Smart