Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG452EQ-T1-E3

DG452EQ-T1-E3

DG452EQ-T1-E3

Vishay Siliconix

118ns, 97ns SPST - NO 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG452 16 Pins 500pA 5V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

DG452EQ-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 15 Weeks
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 172.98879mg
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2012
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 7.3Ohm
Additional Feature ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 450mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
[email protected] Reflow Temperature-Max (s) 40
Base Part Number DG452
Pin Count 16
Polarity Non-Inverting
Number of Channels 1
Max Supply Voltage 36V
Min Supply Voltage 12V
Operating Supply Current 5μA
Nominal Supply Current 500nA
Power Dissipation 450mW
Max Supply Current 500nA
Throw Configuration SPST
Turn On Delay Time 118 ns
Number of Inputs 4
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 97 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 5.3Ohm
Min Dual Supply Voltage 5V
High Level Output Current 100mA
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 31pf 34pF
On-state Resistance Match-Nom 0.13Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 118ns, 97ns
Charge Injection 22pC
Channel-to-Channel Matching (ΔRon) 120m Ω
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 256ns
Switch-off Time-Max 113ns
Drain to Source Resistance 4Ohm
Normal Position NO
Voltage - Supply, Dual (V±) ±5V~15V
Height 920μm
Length 5.08mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $3.767777 $3.767777
10 $3.554506 $35.54506
100 $3.353307 $335.3307
500 $3.163498 $1581.749
1000 $2.984432 $2984.432
DG452EQ-T1-E3 Product Details

DG452EQ-T1-E3 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. An electrical component like this is included in the 16 series. A SPST - NO switching circuit is used to build these analog multiplexers. Search with DG452 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 7.3Ohm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 12V voltage fed to the electrical part below 12V. An operating current of 5μA would be sufficient for this switch device. A digital multiplexer may suffer damage if voltage is applied above 500nA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. For dual power supplies, a voltage of at least 5V should be attached. Operating the 4 inputs requires 4 inputs. Additional features of the electronic component include: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY. This electronic component presents a Drain to Source resistance of 4Ohm.

DG452EQ-T1-E3 Features


1 Channels
Switch Circuit: SPST - NO
5μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Drain-to-Source resistance: 4Ohm

DG452EQ-T1-E3 Applications


There are a lot of Vishay Siliconix DG452EQ-T1-E3 Analog Switches & Multiplexers ICs applications.

  • High speed data transmission line cards
  • PDH Multiplexers
  • Transmit
  • Communication systems
  • Microprocessor controlled systems
  • Cellular phones
  • Digital cross connects (DSX-1)
  • Automatic test equipment
  • Medical Instrumentation
  • RGB switches

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News