Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG456EY-T1-E3

  • DG456EY-T1-E3
  • DG456EY-T1-E3

DG456EY-T1-E3

DG456EY-T1-E3

Vishay Siliconix

118ns, 97ns SPST - NO/NC 5.3Ohm Analog Switches BREAK-BEFORE-MAKE DG456 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

SOT-23

DG456EY-T1-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 13 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 665.986997mg
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2008
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 7.3Ohm
Terminal Finish MATTE TIN
Additional Feature ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 600mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
[email protected] Reflow Temperature-Max (s) 40
Base Part Number DG456
Output SEPARATE OUTPUT
Pin Count 16
Number of Channels 1
Number of Circuits 4
Max Supply Voltage 36V
Min Supply Voltage 12V
Operating Supply Current 100μA
Power Dissipation 600mW
Max Supply Current 100μA
Throw Configuration SPST
Turn On Delay Time 118 ns
Number of Inputs 4
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 97 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 5.3Ohm
Min Dual Supply Voltage 5V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 500pA
Channel Capacitance (CS(off), CD(off)) 31pf 34pF
On-state Resistance Match-Nom 0.12Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 118ns, 97ns
Charge Injection 22pC
Channel-to-Channel Matching (ΔRon) 120m Ω
Crosstalk -85dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-off Time-Max 112ns
Drain to Source Resistance 4Ohm
Voltage - Supply, Dual (V±) ±5V~15V
Height 1.55mm
Length 10mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $4.642758 $4.642758
10 $4.379960 $43.7996
100 $4.132038 $413.2038
500 $3.898149 $1949.0745
1000 $3.677499 $3677.499
DG456EY-T1-E3 Product Details

DG456EY-T1-E3 Overview


Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~125°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. Based on SPST - NO/NC switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 4. DG456 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 7.3Ohm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. 12V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 100μA current would be sufficient. A voltage higher than 100μA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. A dual power supply should have at least 5V voltage attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Among the inputs that can be operated are the 4 inputs. Additional features of the electronic component include: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY. Drain to Source resistance for this electronic component is 4Ohm.

DG456EY-T1-E3 Features


1 Channels
Switch Circuit: SPST - NO/NC
100μA Supply Current
Additional Features: ALSO OPERATES WITH 12V SINGLE SUPPLY AND +/-15V DUAL SUPPLY
Drain-to-Source resistance: 4Ohm

DG456EY-T1-E3 Applications


There are a lot of Vishay Siliconix DG456EY-T1-E3 Analog Switches & Multiplexers ICs applications.

  • Cross Connects
  • Video signal routing
  • E1 Multiplexer
  • Digital cross connects (DSX-1)
  • PDAs
  • Fiber to the Home
  • FTTH
  • Audio and video routing
  • Avionics test equipment
  • Medical systems

Related Part Number

ADG1208YRZ-REEL7
Analog Devices Inc.
ADG1208YRZ-REEL7
$0 $/piece
DG507BEW-T1-GE3
Vishay Siliconix
DG507BEW-T1-GE3
$0 $/piece
MAX4518EEE+T
Maxim Integrated
MAX4518EEE+T
$0 $/piece
ADG781BCP-REEL7
Rochester Electronics, LLC
ADG781BCP-REEL7
$0 $/piece
ADG5436FBRUZ
Analog Devices Inc.
ADG5436FBRUZ
$0 $/piece
MAX4690EAE+
Maxim Integrated
MAX4690EAE+
$0 $/piece
ADG732BSUZ-REEL
Analog Devices Inc.
ADG732BSUZ-REEL
$0 $/piece
DG417LEUA+T
Maxim Integrated
DG417LEUA+T
$0 $/piece
ADG417BRZ
Analog Devices Inc.
ADG417BRZ
$0 $/piece
DG300ACJ
Rochester Electronics, LLC
DG300ACJ
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News