Welcome to Hotenda.com Online Store!

logo
userjoin
Home

DG458DJ-E3

DG458DJ-E3

DG458DJ-E3

Vishay Siliconix

250ns, 250ns 1.5kOhm Analog Switches BREAK-BEFORE-MAKE DG458 16 Pins 1nA 15V 16-DIP (0.300, 7.62mm)

SOT-23

DG458DJ-E3 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Weight 1.627801g
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2013
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 1.5kOhm
Terminal Finish Matte Tin (Sn)
Additional Feature ACTIVE OVERVOLTAGE PROTECTION
Max Power Dissipation 1W
Technology CMOS
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 2.54mm
Base Part Number DG458
Pin Count 16
Operating Supply Voltage 15V
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 36V
Min Supply Voltage 13V
Operating Supply Current 100μA
Max Supply Current 100μA
Propagation Delay 500 ns
Turn On Delay Time 250 ns
Logic Function Multiplexer
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 250 ns
Max Dual Supply Voltage 18V
On-State Resistance (Max) 1.5kOhm
Min Dual Supply Voltage 4.5V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 90 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 5pF 15pF
On-state Resistance Match-Nom 90Ohm
Switch Time (Ton, Toff) (Max) 250ns, 250ns
Channel-to-Channel Matching (ΔRon) 90 Ω
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.02A
Voltage - Supply, Dual (V±) ±4.5V~18V
Height 3.81mm
Length 21.33mm
Width 7.11mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
DG458DJ-E3 Product Details

DG458DJ-E3 Overview


Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Through Hole. Multiplexers and demultiplexers have a ratio of 8:1. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. A total of 1 circuits make up this switch device. DG458 can be used to search for analog multiplexer variants. It has an internal resistance of 1.5kOhm. Datasheets for functions of 16 pins are available. normally, users should not supply switches with voltages higher than 36V. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 13V. This multiplexer would work with 100μA current. When the digital multiplexer is charged above 100μA, damage can occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. With dual power supplies, you should attach at least 4.5V. This electrical part is compatible with 15V operating voltages. Check out the electrical component's additional features, such as the following: ACTIVE OVERVOLTAGE PROTECTION.

DG458DJ-E3 Features


8 Channels
100μA Supply Current
Additional Features: ACTIVE OVERVOLTAGE PROTECTION

DG458DJ-E3 Applications


There are a lot of Vishay Siliconix DG458DJ-E3 Analog Switches & Multiplexers ICs applications.

  • Low-Voltage
  • CSU
  • T1/E1 Terminals
  • Medical
  • RGB switches
  • Remote wireless modules
  • Audio and video routing
  • Cable Modem
  • Residential Gateways, Home Gateway/Router
  • DSLAMs

Related Part Number

MAX321CUA+TG035
MAX309CPE
MAX309CPE
$0 $/piece
MAX4736ETC+T
AZ4052MTR-G1
MAX326CSE+G002
MAX382EPN
MAX382EPN
$0 $/piece
MAX303CPE
MAX303CPE
$0 $/piece
FSA4157AP6
FSA4157AP6
$0 $/piece
MAX4651EUE-T
ADG452BR-REEL

Get Subscriber

Enter Your Email Address, Get the Latest News