MAX309CPE+ Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is provided by advanced packaging method Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature around 0°C~70°C TA extended. 16 terminations have been made so far. The electronic part provides high-quality output because it has 4 channels. A 15V voltage supply should turn on and run the electronic component. The electronic part body is injected with 16 pins. A SP4T switching circuit is used to build these analog multiplexers. 2 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX309. Analog switches have 100Ohm internal resistance. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 30V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. There should be 5V voltage fed to the electrical part below 5V. The analogue multiplexer could operate on 500μA current. Despite this switch's dual supply capability, its voltage should not exceed 20V. For dual power supplies, a voltage of at least 5V should be attached. 28V operating voltages can be used with this electrical part.

MAX309CPE+ Features

4 Channels
Switch Circuit: SP4T
500μA Supply Current

MAX309CPE+ Applications

There are a lot of Maxim Integrated MAX309CPE+ Analog Switches & Multiplexers ICs applications.

• Fiber to the Home
• Battery Powered Instruments
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Mechanical reed relay replacement
• Industrial and process control systems
• Audio signal routing
• Wireless Local Loop
• ISDN NT1/TA
• High-Voltage
• Low-Voltage