DG612DY Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. Electronic part bodies are injected with 16 pins. A SPST - NO switching circuit is used for these analog switches. The internal resistance of this digital multiplexer is 45Ohm. The datasheets for the 16 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 18V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 10V should be applied to the electronic component. Putting voltage greater than 1μA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 15V. When using dual power supplies, you should attach at least 10V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating the 4 inputs requires 4 inputs. There is 45Ohm Drain to Source resistance on this electronic part.

DG612DY Features

Switch Circuit: SPST - NO
-3db Bandwidth: 500MHz
Drain-to-Source resistance: 45Ohm

DG612DY Applications

There are a lot of Vishay Siliconix DG612DY Analog Switches & Multiplexers ICs applications.

• PDAs
• Automotive applications
• Audio/video switches
• CSU
• Remote Powered Equipment
• Data Acquisition Systems
• Private Branch Exchange (PBX)
• Battery Powered Instruments
• T1/E1 Terminals
• Optical Applications